HAD Inc. Drilling Contractors - Wells, Pumps and Service

CERTIFICATIONS

The National Groundwater Association (NGWA) Contractor Certification Program establishes standards of technical competency within the ground water contracting professions and demonstrates that the certified contractor has voluntarily met these standards. By passing NGWA's certification exams contractors prove their knowledge, training, and experience which enables them to perform their job in a competent and professional manner. Prior to taking a series of examinations in specialized subjects, candidates must provide NGWA with proof of two years full-time ground water contracting experience. The NGWA has certified select drillers on our staff. The categories our drillers are licensed in, but are not limited to the following:

Boring and Augering in Unconsolidated Material
Monitoring Well Construction
Cable Tool Drilling in Unconsolidated Material
Cable Tool Drilling in Rock Material
Air Rotary Drilling in Unconsolidated Material
Air Rotary Drilling in Rock Material

In addition, J. A. Hatfield has completed the required studies prescribed in
Goulds Pump School and has been granted a certificate of proficiency and
merit in Domestic Water System Theory and Applications. Jason is capable
of professionally sizing pumps for any application including commercial,
residential, municipal, or industrial.

KEY PERSONNEL

D. L. Hatfield - Owner

I have been involved in the drilling business since 1977. Throughout the
years I have assisted in the drilling of oil and gas wells, water wells, and
GeoProbe™ sampling. I have observed several environmental drilling jobs.
My years of hands-on field experience in addition to assisting customers
on a daily basis has enabled me to play a key role in the drilling business.
I oversee the accounting and purchasing for H.A.D., Inc., including the
purchase of field and office inventory, fleet purchases, and heavy
equipment purchases.

DRILLING DIVISION

J. J. Hatfield
T. S. Bromley
J. A. Hatfield
A. Wolff
S. W. Heiser
S. Hoffer

J. J. Hatfield
Experience Profile

SONIC Technology
Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling.

Texoma 700
Operating experience drilling soil and rock bore holes from 18 inches to 70 inches in diameter, setting steel casing, and rock coring up to 48 inches in diameter core barrel.

Auger Rigs: CME 75, 85, LC60, 1250, 55 High Torque and Mobile B53
Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring.

Cable Tool Rigs: Bucyrus Erie 36-L and 22W
Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter.

Air Rotary Rigs: TH-60, Foremost DR-24 Dual Rotary Drill
Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids.

Well Installation
Experience in the installation of overburden and rock monitoring wells, double and triple cased wells, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods.

Geothermal Heating & Cooling
Hands on experience drilling and installing heating and cooling loops to various depths in bedrock and overburden. Experience in flushing, filling, and completing hook up to unit.

General & Heavy Equipment
Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells.

Education & Accomplishments
1993 Commercial Drivers License - Class A
2003 BP Passport Training
1993 OSHA 40-hour Health & Safety Training and 8-hour Refreshers (29 CFR 1910.120)
2006 BP Passport Training
2005 Exxon Mobil Safety Training
2006 OSHA 8 hour refresher

T. S. Bromley
Experience Profile

SONIC Technology
Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling.

Texoma 700
Operating experience drilling soil and rock bore holes from 18 inches to 70 inches in diameter, setting steel casing, and rock coring up to 48 inches in diameter core barrel.

Auger Rigs: CME 45, 55 High Torque, 75, 750, 85, 95, LC60,
Davey Kent 5, Simco 4000, and Mobile B53
Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring. Trained in the uses of various drilling muds and fluids.

Direct Push: Geoprobe 5400, 4220, and Simco Earthprobe 200
Hands-on experience in general operation, obtaining soil and water samples, and setting one-inch diameter temporary and permanent wells.

Well Installation
Experience in the installation of overburden and rock monitoring wells, double and triple cased soil vapor extraction wells, thermocouples, inclinometers, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods.

General & Heavy Equipment
Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells.

Member of Emergency Response Team
Experience working in Tyvek, Nomex, and Saran suits with respirators.

Education & Accomplishments
1994 Commercial Drivers License - Class A
1996 Train the Trainer Course (OSHA 29 CFR 1910.120)
1996 Certified by the National Ground Water Association
2006 BP Passport Training
2003 Train the Trainer Railroad Safety Course in Compliance with FRA 49 CFR 241
1993-2003 OSHA 40-hour Health & Safety Training and 8-hour Refreshers (29 CFR 1910.120)
2006 OSHA 8 hour refresher

J. A. Hatfield
Master Ground Water Contractor
Experience Profile

Auger Rigs: CME 75, 85, and Mobile B53, Foremost
Dual Rotary DR24
Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring.

Cable Tool Rigs: Bucyrus Erie 36-L and 22W
Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter.

Air Rotary Rigs: TH-60 and REICHdrill T-690
Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids.

Well Installation
Experience in the installation of overburden and rock monitoring wells, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods.

General & Heavy Equipment
Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells.

Education & Accomplishments
1994 Commercial Drivers License - Class B
1993-1994 Completed one year of studies toward a Petroleum
Engineering Degree at Marietta College (Marietta OH)
1994 OSHA 40-hour Health & Safety Training (29 CFR 1910.120)
1996 Certified by the National Ground Water Association
2006 OSHA 8 hour refresher

A. Wolff
Experience Profile

Auger Rigs: CME 75, 85, LC60 and Mobile B53.
Experienced with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, and conventional rock coring.

Direct Push: Geoprobe 5400, 4220, AMS Power Probe 9630,
and Simco Earthprobe 200
Hands-on experience in general operation, obtaining soil and water samples, Macro-Core Sampler, AMS Dual Sampling Tube System, 3" diameter Shelby Tube Samples and setting one and two inch diameter temporary and permanent wells.

Well Installation
Experienced in the installation of one- and two-inch monitoring wells (including pre-packed) and soil vapor extraction wells. Also experienced in well development by various methods.

Education & Accomplishments
1994 Bachelor of Science, Geology - Cleveland State University
1996 Master of Science, Geology - University of Akron
1996 Commercial Drivers License - Class B
1996 OSHA 40-hour Health & Safety Training (29 CFR 1910.120)
2005 Exxon Mobil Safety Training
2006 OSHA 8 hour refresher
2006 BP Passport Training

S. W. Heiser
Experience Profile

Auger Rigs: CME 75 and 85, 55 High Torque, LC60
Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring.

SONIC Technology
Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling.

Cable Tool Rigs: Bucyrus Erie 36-L and 22W
Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter.

Air Rotary Rigs: TH-60 and REICHdrill T-690
Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids.

Well Installation
Experience in the installation of overburden and rock monitoring wells, double and triple cased, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods.

Direct Push: Geoprobe 5400, 4220, AMS Power Probe 9630,
and Simco Earthprobe 200
Hands-on experience in general operation, obtaining soil and water samples, and setting one- and two-inch diameter temporary and permanent wells.

General & Heavy Equipment
Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers.

Education & Accomplishments
1991-1995 United States Marine Corps
1996 Commercial Drivers License - Class B
1996 OSHA 40-hour Health & Safety Training (29 CFR 1910.120)
2005 Exxon Mobil Safety Training
2006 OSHA 8 hour refresher
2006 BP Passport Training

S. Hoffer
Experience Profile

Auger Rigs: CME 85, 55 High Torque, and LC60
Experienced with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, and conventional rock coring. Cable Tool Rigs: Bucyrus Erie 36-L and 22W Hands-on experience in drilling and installing water wells in various diameters.

Well Installation
Experience in the installation of overburden and rock monitoring wells, double and triple cased, soil vapor extraction wells, and residential water wells.

General & Heavy Equipment
Experienced operator of the following heavy equipment: track-hoes, front-end loaders, and dozers.

Education & Accomplishments
1997 Commercial Drivers License - Class B
2001 OSHA 40-hour Health & Safety Training (29 CFR 1910.120)
2005 Exxon Mobil Safety Training
2006 OSHA 8 hour refresher
2006 BP Passport Training



H.A.D., Inc. Drilling Contractors Wells, Pumps and Service 9797 Benner Road Rittman, OH 44270 Phone: 330-925-1000 Fax: 330-925-1105 © 2003 H.A.D., Inc. All Rights Reserved. Other trademarks displayed on this site are the property of their respective companies. Web site designed and produced by Snyder Advertising Art & Design
			CERTIFICATIONS The National Groundwater Association (NGWA) Contractor Certification Program establishes standards of technical competency within the ground water contracting professions and demonstrates that the certified contractor has voluntarily met these standards. By passing NGWA's certification exams contractors prove their knowledge, training, and experience which enables them to perform their job in a competent and professional manner. Prior to taking a series of examinations in specialized subjects, candidates must provide NGWA with proof of two years full-time ground water contracting experience. The NGWA has certified select drillers on our staff. The categories our drillers are licensed in, but are not limited to the following: Boring and Augering in Unconsolidated Material Monitoring Well Construction Cable Tool Drilling in Unconsolidated Material Cable Tool Drilling in Rock Material Air Rotary Drilling in Unconsolidated Material Air Rotary Drilling in Rock Material In addition, J. A. Hatfield has completed the required studies prescribed in Goulds Pump School and has been granted a certificate of proficiency and merit in Domestic Water System Theory and Applications. Jason is capable of professionally sizing pumps for any application including commercial, residential, municipal, or industrial. KEY PERSONNEL D. L. Hatfield - Owner I have been involved in the drilling business since 1977. Throughout the years I have assisted in the drilling of oil and gas wells, water wells, and GeoProbe™ sampling. I have observed several environmental drilling jobs. My years of hands-on field experience in addition to assisting customers on a daily basis has enabled me to play a key role in the drilling business. I oversee the accounting and purchasing for H.A.D., Inc., including the purchase of field and office inventory, fleet purchases, and heavy equipment purchases. DRILLING DIVISION J. J. Hatfield T. S. Bromley J. A. Hatfield A. Wolff S. W. Heiser S. Hoffer J. J. Hatfield Experience Profile SONIC Technology Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling. Texoma 700 Operating experience drilling soil and rock bore holes from 18 inches to 70 inches in diameter, setting steel casing, and rock coring up to 48 inches in diameter core barrel. Auger Rigs: CME 75, 85, LC60, 1250, 55 High Torque and Mobile B53 Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring. Cable Tool Rigs: Bucyrus Erie 36-L and 22W Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter. Air Rotary Rigs: TH-60, Foremost DR-24 Dual Rotary Drill Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids. Well Installation Experience in the installation of overburden and rock monitoring wells, double and triple cased wells, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods. Geothermal Heating & Cooling Hands on experience drilling and installing heating and cooling loops to various depths in bedrock and overburden. Experience in flushing, filling, and completing hook up to unit. General & Heavy Equipment Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells. Education & Accomplishments 1993 Commercial Drivers License - Class A 2003 BP Passport Training 1993 OSHA 40-hour Health & Safety Training and 8-hour Refreshers (29 CFR 1910.120) 2006 BP Passport Training 2005 Exxon Mobil Safety Training 2006 OSHA 8 hour refresher T. S. Bromley Experience Profile SONIC Technology Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling. Texoma 700 Operating experience drilling soil and rock bore holes from 18 inches to 70 inches in diameter, setting steel casing, and rock coring up to 48 inches in diameter core barrel. Auger Rigs: CME 45, 55 High Torque, 75, 750, 85, 95, LC60, Davey Kent 5, Simco 4000, and Mobile B53 Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring. Trained in the uses of various drilling muds and fluids. Direct Push: Geoprobe 5400, 4220, and Simco Earthprobe 200 Hands-on experience in general operation, obtaining soil and water samples, and setting one-inch diameter temporary and permanent wells. Well Installation Experience in the installation of overburden and rock monitoring wells, double and triple cased soil vapor extraction wells, thermocouples, inclinometers, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods. General & Heavy Equipment Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells. Member of Emergency Response Team Experience working in Tyvek, Nomex, and Saran suits with respirators. Education & Accomplishments 1994 Commercial Drivers License - Class A 1996 Train the Trainer Course (OSHA 29 CFR 1910.120) 1996 Certified by the National Ground Water Association 2006 BP Passport Training 2003 Train the Trainer Railroad Safety Course in Compliance with FRA 49 CFR 241 1993-2003 OSHA 40-hour Health & Safety Training and 8-hour Refreshers (29 CFR 1910.120) 2006 OSHA 8 hour refresher J. A. Hatfield Master Ground Water Contractor Experience Profile Auger Rigs: CME 75, 85, and Mobile B53, Foremost Dual Rotary DR24 Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring. Cable Tool Rigs: Bucyrus Erie 36-L and 22W Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter. Air Rotary Rigs: TH-60 and REICHdrill T-690 Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids. Well Installation Experience in the installation of overburden and rock monitoring wells, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods. General & Heavy Equipment Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Hands-on experience installing various brands of pumps for water wells. Education & Accomplishments 1994 Commercial Drivers License - Class B 1993-1994 Completed one year of studies toward a Petroleum Engineering Degree at Marietta College (Marietta OH) 1994 OSHA 40-hour Health & Safety Training (29 CFR 1910.120) 1996 Certified by the National Ground Water Association 2006 OSHA 8 hour refresher A. Wolff Experience Profile Auger Rigs: CME 75, 85, LC60 and Mobile B53. Experienced with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, and conventional rock coring. Direct Push: Geoprobe 5400, 4220, AMS Power Probe 9630, and Simco Earthprobe 200 Hands-on experience in general operation, obtaining soil and water samples, Macro-Core Sampler, AMS Dual Sampling Tube System, 3" diameter Shelby Tube Samples and setting one and two inch diameter temporary and permanent wells. Well Installation Experienced in the installation of one- and two-inch monitoring wells (including pre-packed) and soil vapor extraction wells. Also experienced in well development by various methods. Education & Accomplishments 1994 Bachelor of Science, Geology - Cleveland State University 1996 Master of Science, Geology - University of Akron 1996 Commercial Drivers License - Class B 1996 OSHA 40-hour Health & Safety Training (29 CFR 1910.120) 2005 Exxon Mobil Safety Training 2006 OSHA 8 hour refresher 2006 BP Passport Training S. W. Heiser Experience Profile Auger Rigs: CME 75 and 85, 55 High Torque, LC60 Operating experience with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, wire line, and conventional rock coring. SONIC Technology Operating experience drilling and sampling in various rock and overburden formations. Sampling and well installation to depths of 250 feet. Drilling with 4 inch, 6 inch, 8 inch, and 10 inch tooling. Cable Tool Rigs: Bucyrus Erie 36-L and 22W Hands-on experience in drilling and installing wells from five inches to thirty-six inches in diameter. Air Rotary Rigs: TH-60 and REICHdrill T-690 Experienced operator drilling in various type of rock formations. Trained to drill with drilling muds and fluids. Well Installation Experience in the installation of overburden and rock monitoring wells, double and triple cased, soil vapor extraction wells, residential, agricultural, municipal, and commercial water wells. Also experienced in well development by various methods. Direct Push: Geoprobe 5400, 4220, AMS Power Probe 9630, and Simco Earthprobe 200 Hands-on experience in general operation, obtaining soil and water samples, and setting one- and two-inch diameter temporary and permanent wells. General & Heavy Equipment Experienced operator of the following heavy equipment: track-hoes, front-end loaders, dozers, and tractor trailers. Education & Accomplishments 1991-1995 United States Marine Corps 1996 Commercial Drivers License - Class B 1996 OSHA 40-hour Health & Safety Training (29 CFR 1910.120) 2005 Exxon Mobil Safety Training 2006 OSHA 8 hour refresher 2006 BP Passport Training S. Hoffer Experience Profile Auger Rigs: CME 85, 55 High Torque, and LC60 Experienced with the continuous sampling tube system, hydro-punch sampler, air and wash rotary, casing advancement, hollow stem augering, and conventional rock coring. Cable Tool Rigs: Bucyrus Erie 36-L and 22W Hands-on experience in drilling and installing water wells in various diameters. Well Installation Experience in the installation of overburden and rock monitoring wells, double and triple cased, soil vapor extraction wells, and residential water wells. General & Heavy Equipment Experienced operator of the following heavy equipment: track-hoes, front-end loaders, and dozers. Education & Accomplishments 1997 Commercial Drivers License - Class B 2001 OSHA 40-hour Health & Safety Training (29 CFR 1910.120) 2005 Exxon Mobil Safety Training 2006 OSHA 8 hour refresher 2006 BP Passport Training